Description
Details
Product Description
The centrepiece of the set is the testo 330i flue gas analyzer with H2-compensated CO sensor. The flue gas analyzer is therefore also approved for the official acceptance testing of heating systems.
Operation of the flue gas analyzer and the display of readings are implemented independently of the measuring location via the testo 330i App on your smartphone or tablet. Here, you can make adjustments to the measuring instrument, analyze the flue gas values, enter customer data and create measurement protocols. You can then add comments or photos of the system to the protocols, and send them to the customer or your office via e-mail.Requirement: iOS 7.1 / Android 4.3 or newer. Mobile end device with Bluetooth 4.0.
The testo 330i flue gas analyzer also has the following impressive features
- User-replaceable long-life sensors with a service life of up to 6 years. This saves at least one sensor replacement over the flue gas analyzer’s typical useful life
- TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1-3
- Integrated draught and gas zeroing without removing the probe. The probe can remain in the flue during zeroing
- Fresh air dilution upon exceeding a CO threshold value up to 30,000 ppm
- Fully enclosed, particularly robust plastic housing
Also included in the set: a modular flue gas sampling probe (180 mm) with a 65 cm long, extra-flexible hose and a 190 mm long combustion air temperature probe.
The testoFix probe holder is included in the set, which enables the probes to be securely attached to the flue gas duct quickly and easily. This global innovation also serves as a fall-proof suspension system for the testo 330i flue gas analyzer. A mains unit and the practical system case, in which all set components can be stowed away compactly and safely, complete this set.
Delivery Scope
• Modular flue gas probe with hose (650 mm) 0600 9780
• Combustion air temperature probe (190 mm) 0600 9787
• International mains unit 0554 1096
• testoFix probe holder for probes with a diameter of 8 mm (0554 3006)
• Instrument case for testo 330i, probes and accessories (dimensions: 520 × 130 × 400 mm, WxHxD) 0516 3302
Technical Data
| General technical data | |
|---|---|
| Weight | 720 g (excluding battery) |
| Dimensions | 270 x 160 x 57 mm |
| Operating temperature | -5 to +45 °C |
| Power supply | Rech. batt. block 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A (optional) |
| System requirements | requires iOS 7.1 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0 |
| Maximum memory | 500000 readings |
| Storage temperature | -20 to +50 °C |
| Differential Pressure – Piezoresistive | |
|---|---|
| Measuring range | 0 to 300 hPa |
| Accuracy | ±0.5 hPa (0.0 to +50.0 hPa)
±1 % of mv (+50.1 to +100.0 hPa) ±1.5 % of mv (Remaining Range) |
| Resolution | 0.1 hPa |
| Flue gas O₂ | |
|---|---|
| Measuring range | 0 to 21 Vol.% |
| Accuracy | ±0.2 Vol.% |
| Resolution | 0.1 Vol.% |
| Flue gas CO (with H₂-compensation) | |
|---|---|
| Measuring range | 0 to 8000 ppm |
| Accuracy | ±10 ppm or ±10 % of mv (0 to 200 ppm)
±20 ppm or ±5 % of mv (201 to 2000 ppm) ±10 % of mv (2001 to 8000 ppm) |
| Resolution | 1 ppm |
| CO determination (with H₂-compensation), automatic dilution | |
|---|---|
| Measuring range | 0 to 30000 ppm |
| Accuracy | ±200 ppm or ±20 % of mv (0 to 30000 ppm) |
| Resolution | 1 ppm |
| Flue gas NO | |
|---|---|
| Measuring range | 0 to 3000 ppm |
| Accuracy | ±5 ppm (0 to 100 ppm)
±5 % of mv (101 to 2000 ppm) ±10 % of mv (2001 to 3000 ppm) |
| Resolution | 1 ppm |
Option
| Differential Pressure flue gas Draught – Piezoresistive | |
|---|---|
| Measuring range | -9.99 to +40 hPa |
| Accuracy | ±0.02 hPa or ±5 % of mv (-0.50 to +0.60 hPa)
±0.03 hPa (+0.61 to +3.00 hPa) ±1.5 % of mv (3.01 to +40.00 hPa) (the greater value applies) |
| Resolution | 0.01 hPa |
| Temperature | |
|---|---|
| Measuring range | -40 to +1200 °C |
| Accuracy | ±0.5 °C (0.0 to +100.0 °C)
±0.5 % of mv (Remaining Range) |
| Resolution | 0.1 °C (-40 to +999.9 °C)
1 °C (Remaining Range) |
dependent on the thermocouple
| Flue gas degree of effectivity, Eta (calculated) | |
|---|---|
| Measuring range | 0 to 120 % |
| Resolution | 0.1 % |
| Flue gas loss (calculated) | |
|---|---|
| Measuring range | 0 to 99.9 % |
| Resolution | 0.1 % |
| Flue gas CO₂ calculation (calculated from O₂) | |
|---|---|
| Measuring range | Display range 0 to CO₂ max |
| Accuracy | ±0.2 Vol.% |
| Resolution | 0.1 Vol.% |
Reviews
There are no reviews yet.