Description
Standards and EC Directives
Conforms to the following EC Directives:
• Machinery Directive
• Low Voltage Directive
• EMC Directive
• EN ISO 14119
• EN60947-5-1
• GS-ET-19
Certified Standards
| Certification body | Standard | File No. |
|---|---|---|
| TÜV SÜD | EN60947-5-1 (certified direct opening) | Consult your OMRON representative for details. |
| UL *1 | UL508, CSA C22.2 No.14 | E76675 |
| CQC (CCC) | GB/T 14048.5 | Consult your OMRON representative for details. |
| KOSHA *2 | EN60947-5-1 | Consult your OMRON representative for details. |
*1. Certification has been obtained for UL CSA C22.2 No. 14.
*2. Only certain models have been certified.
Certified Standard Ratings
TÜV (EN60947-5-1) CCC (GB/T 14048.5)
| Utilization category | AC-15 | DC-13 |
|---|---|---|
| Rated operating current (Ie) | 1.5 A *1 1 A *2 |
0.22 A |
| Rated operating voltage (Ue) | 120 V | 125 V |
Note: Use a 4 A fuse that conforms to IEC60127 as a short-circuit protection device. This fuse is not included with the switch.
*1. 11-42, 21-52, 21-22
*2. Other terminals
UL/CSA (UL508, CSA C22.2 No.14)
C150
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 120 VAC | 2.5 A | 15 | 1.5 | 1,800 | 180 |
R150
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 125 VDC | 1.0 A | 0.22 | 0.22 | 28 | 28 |
Solenoid Coil Characteristics
| Item | 24 VDC |
|---|---|
| Rated operating voltage (100% ED) | 24 VDC +10%, -15% |
| Current consumption * | Power ON: 6-contact type Approx. 6.4 W at 0.26 A 4-contact/5-contact type Approx. 4.8 W at 0.2 A Constant: Approx. 2.6 W (average) at 0.2 A (max.) |
| Insulation | Class E (to 120°C) |
* A starting current is applied to the solenoid for Approx. 10 seconds.
After this, the internal circuit switches to a constant current.
Note: For solenoid lock models, be sure to supply power to the solenoid after the door is closed (after the operation key
is inserted).
If the door is closed after power is supplied to the solenoid, locking the operation key may not be possible.
For details, refer to “Solenoid Lock Models” on catalog.
After this, the internal circuit switches to a constant current.
Note: For solenoid lock models, be sure to supply power to the solenoid after the door is closed (after the operation key
is inserted).
If the door is closed after power is supplied to the solenoid, locking the operation key may not be possible.
For details, refer to “Solenoid Lock Models” on catalog.
Indicator
| Item | LED type |
|---|---|
| Rated voltage | 24 VDC |
| Current consumption | Approx.10 mA |
| Color (LED) | Orange |
Characteristics
| Interlock type | Type 2 (EN ISO 14119) | |
|---|---|---|
| Coding level | Low level coded (EN ISO 14119) | |
| Degree of protection | IP67 *1 TYPE 4X Indoor use only (UL, CSA) |
|
| Durability *2 | Mechanical | 1,000,000 operations min. |
| Electrical | 150,000 operations min. (1 A resistance at 125 VAC) *3 | |
| Operating speed | 0.05 to 1 m/s | |
| Operating frequency | 4- and 5-contact Model: 30 operations minute max. 6-contact Model: 5 operations minute max. |
|
| Direct opening force *4 | 60 N min. (EN60947-5-1) | |
| Direct opening travel *4 | 15 mm min. (EN60947-5-1) | |
| Holding force *5 | 1,300 N min. | |
| Contact resistance | 200 mΩ max. | |
| Minimum applicable load *6 | 1 mA resistive load at 5 VDC (N-level reference value) | |
| Rated insulation voltage (Ui) | 150 V (EN60947-5-1) | |
| Rated frequency | 50/60 Hz | |
| Protection against electric shock | Class II (double insulation)  |
|
| Pollution degree (operating environment) | 3 (EN60947-5-1) | |
| Impulse withstand voltage (Uimp) (EN60947-5-1) |
Between terminals of same polarity | 1.5 kV |
| Between terminals of different polarity | 1.5 kV | |
| Between other terminals and non-current carrying metallic parts |
2.5 kV | |
| Insulation resistance | 100 Ω min. (at 500 VDC) | |
| Vibration resistance |
Malfunction | 10 to 55 Hz, 0.35 mm single amplitude |
| Shock resistance |
Malfunction | 80 m/s2 min. |
| Destruction | 1,000 m/s2 min. | |
| Conditional short-circuit current | 100 A (EN60947-5-1) | |
| Conventional free air thermal current (Ith) | 2.5A (11-42, 21-52, 21-22) 1A (Others) |
|
| Ambient operating temperature | -10 to 55°C (with no icing) | |
| Ambient operations humidity | 95% max. | |
| Weight | Head: Resin Approx. 290 g (Connector model) Approx. 330 g (Terminal block model) Head: Metal Approx. 370 g (Connector model) Approx. 410 g (Terminal block model) |
|
Reviews
There are no reviews yet.