Description
Approved Standards
| Agency | Standard | File No. |
|---|---|---|
| UL * | UL508, CSA C22.2 No.14 | E76675 |
| CCC(CQC) | GB/T14048.5 | Contact your OMRON representative for details. |
Note: Ask your OMRON representative for information on approved models.
* UL certified for CSA C22.2 No. 14.
Ratings
| Rated voltage | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125 VAC 250 VAC 480 VAC |
10 10 3 |
3 2.5 1.5 |
1.5 1.25 0.75 |
10 10 2.5 |
5 3 1.5 |
2.5 1.5 0.75 |
||
| 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC |
10 10 6 0.5 0.25 |
3 3 3 0.4 0.2 |
1.5 1.5 1.5 0.4 0.2 |
6 6 5 0.05 0.03 |
5 5 5 0.05 0.03 |
2.5 2.5 2.5 0.05 0.03 |
||
| Inrush current | NC | 30 A max. |
|---|---|---|
| NO | 15 A max. |
Note: 1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The above ratings were tested under the following conditions.
(1) Ambient temperature: +20±2°C
(2) Ambient humidity: 65±5%RH
(3) Operating frequency: 20 operations/min
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The above ratings were tested under the following conditions.
(1) Ambient temperature: +20±2°C
(2) Ambient humidity: 65±5%RH
(3) Operating frequency: 20 operations/min
Approved Standard Ratings
UL/CSA
A300
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 120 VAC | 10A | 60 | 6 | 7,200 | 720 |
| 240 VAC | 30 | 3 | |||
EN60947-5-1
CCC (GB/T14048.5)
| Applicable category and ratings |
|---|
| AC-12 10 A/250 VAC |
Characteristics
| Degree of protection | IP67 | |
|---|---|---|
| Durability | Mechanical | 10,000,000 operations min. |
| Electrical | 500,000 operations min. | |
| Operating speed | 0.05 mm/s to 0.5 m/s *1 | |
| Operating frequency |
Mechanical | 120 operations/min |
| Electrical | 20 operations/min | |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 M Ω min. (at 500 VDC) | |
| Contact resistance | 15 m Ω max. (initial value for the built-in switch when tested alone) | |
| Dielectric strength |
Between terminals of the same polarity | 1,000 VAC, 50/60 Hz for 1 min |
| Between each terminal and non- current-carrying part |
2,000 VAC, 50/60 Hz for 1 min | |
| Rated insulation voltage (Ui) | 1,000 VAC | |
| Pollution degree (operating environment) | 3 (IEC947-5-1) | |
| Protection against electric shock | Class II | |
| PTI (tracking characteristics) | 175 | |
| Switch category | D (IEC335) | |
| Rated operating current (Ie) | 10 A | |
| Rated operating voltage (Ue) | 250 VAC | |
| Vibration resistance |
Malfunction | 10 to 55 Hz, 1.5-mm double amplitude *2 |
| Shock resistance |
Destruction | 1,000 m/s2 min. |
| Malfunction | 100 m/s2 min. *1 *2 | |
| Ambient operating temperature | – 10 ° C to +80 ° C (with no icing) | |
| Ambient operating humidity | 35% to 95%RH | |
| Weight | Approx. 71 g (in case of panel mount plunger) | |
Reviews
There are no reviews yet.